Carmanhaas Fiber jarida qaybaha indhaha waxaa loo isticmaalaa in noocyada kala duwan ee fiber laser goynta madaxa, gudbinta iyo diiradda saarayaa wax soo saarka ee fiber ka si loo gaaro ujeedada goynta xaashida.
(1) Walax quartz nuugista aadka u hooseeya ee dibedda laga keeno
(2) Saxnaanta dusha sare: λ/5
(3) Isticmaalka awoodda: Ilaa 15000W
(4) Daahan nuugista aadka u hooseeya, heerka nuugista <20ppm, wakhtiga nolosha dheer
(5) Saxnaanta dhammaystirka dusha aspherical ilaa 0.2μm
| Tilmaamaha | |
| Qalabka Substrate-ka | Silica isku dhafan |
| Dulqaadka cabbirka | +0.000”-0.005” |
| Dulqaadashada Dhumucda | ± 0.01" |
| Tayada dusha sare | 40-20 |
| Is barbar dhig: (Plano) | ≤ 1 daqiiqo |
| Tilmaamaha | |
| Heerka Labada Dhinac ee AR dahaarka | |
| Wadarta nuugista | <100PPM |
| Gudbinta | >99.9% |
| Dhexroorka (mm) | Dhumucda (mm) | Dahaarka |
| 18 | 2 | AR/AR @ 1030-1090nm |
| 20 | 2/3/4 | AR/AR @ 1030-1090nm |
| 21.5 | 2 | AR/AR @ 1030-1090nm |
| 22.35 | 4 | AR/AR @ 1030-1090nm |
| 24.9 | 1.5 | AR/AR @ 1030-1090nm |
| 25.4 | 4 | AR/AR @ 1030-1090nm |
| 27.9 | 4.1 | AR/AR @ 1030-1090nm |
| 30 | 1.5/5 | AR/AR @ 1030-1090nm |
| 32 | 2/5 | AR/AR @ 1030-1090nm |
| 34 | 5 | AR/AR @ 1030-1090nm |
| 35 | 4 | AR/AR @ 1030-1090nm |
| 37 | 1.5/1.6/7 | AR/AR @ 1030-1090nm |
| 38 | 1.5/2/6.35 | AR/AR @ 1030-1090nm |
| 40 | 2/2.5/3/5 | AR/AR @ 1030-1090nm |
| 45 | 3 | AR/AR @ 1030-1090nm |
| 50 | 2/4 | AR/AR @ 1030-1090nm |
| 80 | 4 | AR/AR @ 1030-1090nm |
Taxaddar weyn waa in la qaataa marka la maaraynayo indhaha infrared. Fadlan ogow taxaddarrada soo socda:
1. Had iyo jeer xidho sariiraha faraha ee aan budada lahayn ama galoofyada cinjirka/latex ka samaysan markaad gacanta ku qabanayso muraayadaha indhaha. Wasakh iyo saliid ka soo baxda maqaarka waxay si ba'an u wasakhayn karaan indhaha, taasoo keenta hoos u dhac weyn oo xagga shaqada ah.
2. Ha u isticmaalin wax qalab ah si aad u maareyso indhaha -- tan waxaa ku jira tuwisiyeyaasha ama wax-soo-saarka.
3. Had iyo jeer saar muraayadaha indhaha si aad u ilaaliso.
4. Waligaa ha dhigin muraayadaha indhaha adag ama dusha xun. Infrared optics si fudud ayaa loo xoqin karaa.
5. Dahab qaawan ama naxaas qaawan waa inaan marnaba la nadiifin lana taaban.
6. Dhammaan alaabta loo isticmaalo infrared optics waa jilicsan, ha ahaadeen hal crystal ama polycrystalline, mid weyn ama ganaax. Uma xoog badna sida quraarada mana u adkeysan doonaan hababka caadiga ah ee loo isticmaalo muraayadaha indhaha.
