Carmanhaas ZNSE Daaqadaha la sifeeyay ayaa inta badan loo isticmaalaa hababka indhaha si loo kala saaro deegaanka qayb ka mid ah nidaamka iyo mid kale, sida in la xidho vacuum ama unugyada cadaadiska sare.Sababtoo ah maaddada gudbinta infrared-ka ayaa leh tilmaam sare oo dib-u-gurasho ah, daahan ka-hortagga milicsiga ayaa sida caadiga ah lagu dabaqaa daaqadaha si loo yareeyo khasaaraha sababtoo ah milicsiga.
Si loo ilaaliyo lensyada iskaanka ee dhabarka iyo khataraha kale ee goobta shaqada, Carmanhaas waxay bixisaa daaqado ilaalin ah, oo sidoo kale loo yaqaan daaqadaha qashinka kuwaas oo lagu daray guud ahaan qaybta lensiska sawirka, ama si gaar ah loo iibiyo.Daaqadahan plano-plano waxa laga heli karaa ZnSe iyo agabka Ge iyo sidoo kale la keenay ku rakiban ama aan la rakibin.
| Tilmaamaha | Heerarka |
| Dulqaadka cabbirka | +0.0mm / -0.1mm |
| Dulqaadashada Dhumucda | ±0.1mm |
| Is barbar dhig: (Plano) | ≤ 3 daqiiqo |
| Nadiifi Aperture (darantay) | 90% dhexroorka |
| Sawirka dusha sare @ 0.63um | Awoodda: 1 geesood, aan joogto ahayn: 0.5 gees |
| xoq-Diid | Ka wanaagsan 40-20 |
| Tilmaamaha | Heerarka |
| Mawjada dhererka | AR@10.6um both sides |
| Wadarta heerka nuugista | <0.20% |
| Milicsi dusha kasta | <0.20% @ 10.6um |
| Gudbinta dusha kasta | >99.4% |
| Dhexroorka (mm) | Dhumucda (mm) | Dahaarka |
| 10 | 2/4 | Dahaar la'aan |
| 12 | 2 | Dahaar la'aan |
| 13 | 2 | Dahaar la'aan |
| 15 | 2/3 | Dahaar la'aan |
| 30 | 2/4 | Dahaar la'aan |
| 12.7 | 2.5 | AR/AR@10.6um |
| 19 | 2 | AR/AR@10.6um |
| 20 | 2/3 | AR/AR@10.6um |
| 25 | 2/3 | AR/AR@10.6um |
| 25.4 | 2/3 | AR/AR@10.6um |
| 30 | 2/4 | AR/AR@10.6um |
| 38.1 | 1.5/3/4 | AR/AR@10.6um |
| 42 | 2 | AR/AR@10.6um |
| 50 | 3 | AR/AR@10.6um |
| 70 | 3 | AR/AR@10.6um |
| 80 | 3 | AR/AR@10.6um |
| 90 | 3 | AR/AR@10.6um |
| 100 | 3 | AR/AR@10.6um |
| 135L x 102W | 3 | AR/AR@10.6um |
| 161L x 110W | 3 | AR/AR@10.6um |
Taxaddar weyn waa in la qaataa marka la maaraynayo indhaha infrared.Fadlan ogow taxaddarrada soo socda:
1. Had iyo jeer xidho sariiraha faraha ee aan budada lahayn ama galoofyada cinjirka/latex marka aad gacanta ku qabanayso qalabka indhaha.Wasakh iyo saliid ka soo baxda maqaarka waxay si ba'an u wasakhayn karaan indhaha, taasoo keenta hoos u dhac weyn oo xagga shaqada ah.
2. Ha u isticmaalin wax qalab ah si aad u maareyso indhaha -- tan waxaa ku jira tuwisiyeyaasha ama wax-soo-saarka.
3. Had iyo jeer saar muraayadaha indhaha si aad u ilaaliso.
4. Waligaa ha dhigin muraayadaha indhaha adag ama dusha xun.Infrared optics si fudud ayaa loo xoqin karaa.
5. Dahab qaawan ama naxaas qaawan waa inaan marnaba la nadiifin lana taaban.
6. Dhammaan alaabta loo isticmaalo infrared optics waa jilicsan, ha ahaadeen hal crystal ama polycrystalline, mid weyn ama ganaax.Uma xoog badna sida quraarada mana u adkeysan doonaan hababka caadiga ah ee loo isticmaalo muraayadaha indhaha.
