Qalabka indhaha ee laysarka ayaa aad caan ugu ah PCB khafiifka ah iyo cashada.Codsiga laysarka waxaa loogu talagalay panel of Ag etching, waxa ay waydiisaa isku midka ahaanshaha cashada ee cabbirka beam iyo aagga saamaynta kulaylka aadka u cidhiidhi ah.Ftheta waxay noqon doontaa naqshad adag iyo dahaar.
Carmanhaas waxay soo bandhigtaa muraayadaha indhaha ee leysarka ee xirfadda leh.Qaybaha indhaha waxay inta badan tixraacaan qaybaha indhaha ee loo isticmaalo sixitaanka sabuuradda wareegga.Nidaamyadan indho-indheynta ayaa guud ahaan ka kooban hababka iskaanka galvanometer, oo ay ku jiraan ballaadhinta iftiinka, galvanometers iyo lenska iskaanka F-THETA.
(1) Saxnaanta dusha lenska <λ/5, nidaamka isu-ururinta ee muraayadda ujeeddada ayaa looga baahan yahay si loo hubiyo in dhererka goobta uu yahay mid joogto ah;
(2) Joogteynta barta diiradda saara qaab-buuxa > 95%;
(3) Joogteynta diyaaradda focal <0.5mm;
(4) Qaabka saamiga dhererka focal>1.05.
1064nm F-Theta Lens
| Qaybta Sharaxaada | Dhererka Focal (mm) | Goobta Sawirka (mm) | Gelitaanka ugu badan Arday (mm) | Fogaanta Shaqada (mm) | Koritaanka Dulqaad |
| SL-1064-140-200 | 200 | 140x140 | 14 | 208 | M85x1 |
| SL-1064-185-255-(16CA) | 255 | 185x185 | 16 | 274 | M85x1 |
1064nm Beam Expander
| Qaybta Sharaxaada | Balaadhinta Saamiga | Gelida CA (mm) | Wax soo saarka CA (mm) | Housing Dia (mm) | Guriyeynta Dhererka (mm) | Koritaanka Dulqaad |
| BE-1064-D23:40.5-1.5x | 1.5X | 10 | 20.7 | 27 | 40.5 | M22*0.75 |
| BE4-(1030-1090)-D35:163.9-Z14x | 1X-4X | 20 | 35 | 44 | 163.9 | / |
| BE4-(1030-1090)-D34:162.6-Z210x | 2X-10X | 14 | 34 | 40 | 162.6 | / |
1064nm Muraayad
| Dhexroorka (mm) | Dhumucda (mm) | Dahaarka |
| 25.4 | 6.35 | HR@1030-1090nm,45° AOI |
| 30 | 5 | HR@1030-1090nm,45° AOI |
| 50 | 10 | HR@1030-1090nm,45° AOI |
